KMT waterjet OEM partner machines are powered by KMT pumps ranging from 90,000 psi to 55,000 psi, with installations available in over 100 countries.
The KMT Streamline PRO® 90,000 psi Waterjet Pumps will significantly increase production by cutting in less time and use up to 50% less abrasive to produce the Lowest Cost Per Part! The PRO pump is available in three horse-powers for a wide range of cutting applications: 125, 60 and 50 HP
KMT Waterjet Systems ADS Series Abrasive Hoppers for Waterjet Machines are easily re-filled during the cutting process—no need to stop cutting! These hoppers are available in 2 sizes: 500 & 2,000 lb.
KMT Waterjet SL-VI Pumps have decades of proven performance and are considered the Industry Workhorse! The SL-VI Series of pumps are available in: 15, 30, 50, 100 and 200 HP
Our 500 V Hopper precisely monitors the availability of sufficient abrasive closely during the entire cutting process and pneumatically transfers it to the onboard metering device.
The New STREAMLINE® CLASSIC Series employs long-stroke technology designed for ease of use, reliability and maximum uptime…Classic KMT with modern technology!
Optimized abrasive consumption for customized applications. Controlled through a central CNC controller or a potentiometer, the FEEDLINE V supplies the cutting nozzle with the optimized flow of abrasive, saving material and costs.
The Ara™ high-pressure pump meets all essential requirements for successful and seamless operation of a waterjet cutting system. The highly reliable intensifier design is one of the key features of the Ara™ pump and is one of the most successful and reliable KMT intensifier designs, called “HSEC”.
The Feedline Precision Abrasive Metering System is an economical and reliable option for accurate delivery of abrasive to the cutting nozzle.
The TRILINE® pump has an excellent cost of ownership value and can be used as a stand-alone unit for everyday cutting needs.
Never shut down production for tank clean outs again. The all new ATS 2200 or 4400 is the perfect way to improve your waterjet operations.
The KMT Waterjet IDE® (Integrated Diamond Eductor) One-piece Assembly Cutting Head is rated for pressures up to 60,000 psi and 90,000 psi and is a waterjet nozzle breakthrough in simplicity & peak performance.
The self-aligning components of the KMT AUTOLINE® 60,000 psi and PRO 90,000 psi cutting heads provide true, perfect alignment to extend the life of focusing tubes and mixing chambers.
PROVEN PERFORMANCE AT EXTREME PRESSURES! Our AQUALINE® pure water pneumatic valves have gained an industry-wide reputation for being among the quickest and the most reliable pure water cutting heads under extreme working conditions.
Compare 90,000 psi vs. 60,000 psi cutting and see how much faster you get the job done and at a lower cost per part! The KMT Waterjet Cut Calculator 2.0 App incorporates 25 materials, offers a wider range of substrate thicknesses, horsepower, orifice size, and abrasive rates.
The KMT Waterjet NEO Pump incorporates over 50 years of experience offering unparalleled waterjet cutting technological achievements.
THE WATERJET INDUSTRY WORKHORSE
ADDITIONAL INFORMATION
THE INDUSTRY WORKHORSE!
Since 1971, the STREAMLINE® SL-VI Series has been available with horsepower offerings of 15, 50, 100, and 200 HP at 60,000 PSI. The SL-VI Series is a configurable water jet pump that can be custom-built based on a variety of options to meet your cutting solution requirements.
As the pioneers of waterjet cutting, the KMT Streamline Series pumps were purchased starting in 1971, because of proven reliability and ease of service.
From the basic model to the fully loaded, the result is a waterjet pump that delivers the highest efficiency and profit.
FEATURES
The STREAMLINE® Intensifier employs long-stroke technology for ease of use, reliability & maximum uptime. MILLIONS OF HOURS OF PROVEN PERFOMANCE!
INCREASED UPTIME
• QUICK CHANGE CERAMIC PLUNGER
• 20 MINUTE SEAL CHANGE*
• NO NEED TO REMOVE TOPWORKS FOR REPAIR**
*Based on experienced technician & proper tools
**Lockout/tagout procedures must be followed
EASE OF MAINTENANCE
• ONE-PIECE CARTRIDGE HYDRAULIC SEAL
• HARD SEAL END CAP – Less parts: 1 seal vs. 2 seals, Small torque wrench
• MODULAR DESIGN – No tie rods
• NO SQUARING FIXTURE REQUIRED
REDUCED COMPONENT WEAR
• LONG STROKE – Longer life
• SMOOTH ELECTRONIC SHIFTING – Better edge quality
• ROBUST HIGH PRESSURE CYLINDER – Designed for waterjet applications
Below charts are a brief overview of pump specifications. Please see above PDF’s on this page for detailed pump specifications.
Description | Imperial | Metric |
---|---|---|
Motor Rating | 15hp | 11 kw |
Pressure Range (Deadhead) | 60,000psi | 4.137 bar |
Max. Flow Rate at Max. Pressure (60 hz) | 0.30 gpm | 1.14 L/min |
Length | 56" | 1.400 mm |
Width | 28" | 711 mm |
Height | 33" | 838 mm |
Weight | 1,800 lbs. | 816.46 kg |
DESCRIPTION | IMPERIAL | METRIC |
---|---|---|
Motor Rating | 50 hp | 37 kw |
Pressure Range (Deadhead) | 60,000 psi | 4.137 bar |
Max. Flow Rate at Max. Pressure (60 hz) | 1.0 gpm | 3.78 L/min |
Length | 68" | 1.727 mm |
Width | 46" | 1.168 mm |
Height | 60" | 1.524 mm |
Weight | 2,900 lbs. | 1.315 kg |
Please see PDF on this page for more specifications
DESCRIPTION | IMPERIAL | METRIC |
---|---|---|
Motor Rating | 100 hp | 75 kw |
Pressure Range (Deadhead) | 60,000 psi | 4.137 bar |
Max. Flow Rate at Max. Pressure (60 hz) | 1.88 gpm | 7.12 L/min |
Length | 84" | 2.134 mm |
Width | 54" | 1.372 mm |
Height | 60" | 1.524 mm |
Weight | 4,200 lbs | 1.905 kg |
Please see PDF on this page for more specifications
DESCRIPTION | IMPERIAL | METRIC |
---|---|---|
Motor Rating | 200 hp | 149 kw |
Pressure Range (Deadhead) | 60,000 psi | 4.137 bar |
Max. Flow Rate at Max. Pressure (60 hz) | 4 gpm | 14 L/min |
Length | 91" | 2.311 mm |
Width | 67" | 1.702 mm |
Height | 70" | 1.778 mm |
Weight | 9,220 lbs | 4.182 kg |
Please see PDF on this page for more specifications
The KMT SL-VI is the most recognized waterjet pump in the World.
Companies in a variety of industries have been using KMT Waterjet cutting products with great effectiveness for more than 53 years.
• Precision cutting without waste & eliminates second operation finishing
• Ability to cut nearly all types of materials & thicknesses – from thin foils to 12″
• Waterjet cutting combines with other processing methods: laser, saws, plasma cutting & punching
Thanks to its flexibility and reliability, No Heat Affected Zone, no secondary finishing, waterjet technology is suitable for both large nesting productions as well as small series and complex specialized applications.
The KMT Waterjet global OEM network offers the largest variety of entry level, standard waterjet tables, large format machines, 5 axis motion control, and robotic integration in the waterjet industry including testing, designing, and manufacturing solutions.
This video shows Shape Process Automation waterjet trimming at six-axis, materials for the automotive industry.