STREAMLINE PRO® 90,000 PSI / 50HP Waterjet PUMP

The PRO 50 pump is designed for a lower investment while still delivering maximum productivity, profitabilty and extended performance cutting at 90,000PSI.

KMT Waterjet STREAMLINE PRO® Series

Find out why THE RIGHT KMT PUMP MATTERS!

KMT Waterjet PRO 50 | LOWER COST PER PART! KMT Pro 50 HP Pump

WHY PAY MORE TO CUT LESS PARTS?

The PRO 50 HP Pump will significantly increase cutting productivity by up to 40% over industry standard 60,000psi/50hp cutting speeds.

90,000PSI vs. 60,000PSI | Annual Production Numbers for Cutting 1” Stainless Steel:*


PRO 50 Waterjet PUMP SPECIFICATIONS

Below chart is a brief overview of pump specifications. Please see above PDF on this page for detailed pump specifications.

PRO 50 DESCRIPTION IMPERIAL METRIC
Motor Rating
30 hp
22 kw
Pressure Range (Deadhead)
55,000 psi
4.137 bar
Max. Flow Rate at Max. Pressure (60 hz)
.62 gpm
2.35 lpm
Length
60.16”
1.575 mm
Width
42.17”
1.165 mm
Height
48.23”
1.310 mm
Weight
2,323 lbs.
1053.7 kg
Max. Orifice Size
.011"
0,28 mm

THE KMT Waterjet pump cutting-PRO 50 DIFFERENCE

FLEXIBILITY OF WATERJET CUTTING

Waterjet cutting at 90,000psi with the KMT PRO 50hp pump offers faster cutting & improved precision vs. 60,000psi.

The PRO provides flexibility of smoother cutting a range of materials with no secondary processing when compared to laser & plasma-cut materials.

KMT Waterjet Pro Cutting 6 inch steel

CUT THICK MATERIALS---UP TO 12"

The PRO 50hp pump, with its high pressure and power, efficiently cuts up to 12 inches thick metal.

This benefits customers seeking a near-net finish by reducing processing time & minimizing material waste, ensuring faster job completion & cost savings.  PRO Pumps = Lowest Price Per Part!

KMT Pro 125 pump multiple 4 cutting heads

WATERJET INCREASE PRODUCTIVITY

The KMT PRO 90,000psi/50hp pump cutting with multiple cutting heads increases capacity and accelerates production.

Reduce labor costs, shorter production runs, improves profitability = KMT Waterjet PRO®.

KMT Waterjet Pump-PRO 50 COMPLETE CUTTING SYSTEMS

The KMT Waterjet global OEM network offers the largest variety of entry level, standard waterjet tables, large format machines, 5 axis motion control, and robotic integration in the waterjet industry including testing, designing, and manufacturing solutions.

KMT Waterjet Systems-The Power to do More

This KMT Waterjet video demonstrates how to cut aluminum faster with waterjet pressure at 90,000psi vs. 60,000psi.

By increasing the waterjet pump pressure from 60,000psi to 90,000psi, the velocity of the water jet stream also significantly increases.

The net result is, the higher the pressure, the faster the parts will cut. And by accelerating the water jet stream from 60,000psi to 90,000psi, there is also a reduction in the usage of abrasive costs.

This video shows a side-by-side comparison as to how much faster parts are cut, and how much less abrasive is used by cutting at 90,000psi vs. 60,000psi

Play Video
KMT Service Engineers are regionally located to assist in keeping your system cutting with precision---PM Programs are available!
RAM KMT Service Truck
KMT 360 Assured logo
swirl

Contact form

KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.

We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, for other purposes. You can consent to the use of such technologies by using the “Accept” button, by closing this notice, by scrolling this page, by interacting with any link or button outside of this notice or by continuing to browse otherwise.