We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, for other purposes. You can consent to the use of such technologies by using the “Accept” button, by closing this notice, by scrolling this page, by interacting with any link or button outside of this notice or by continuing to browse otherwise.
- CUTTING SOLUTIONS
- PRODUCTS
- APPLICATIONS/INDUSTRIES
KMT Waterjet AUTOLINE® Abrasive Cutting Head
Best Applications for abrasive waterjet cutting
METAL | STONE | GLASS | COMPOSITES
KMT Waterjet AUTOLINE® Cutting Heads
ABRASIVE WATERJET HIGH SPEED, SELF-ALIGNING CUTTING NOZZLE
Focusing tubes last longer and wear evenly in an aligned cutting head.
The Autoline abrasive waterjet self-aligning components of the KMT AUTOLINE® (60,000 psi) and AUTOLINE PRO (90,000 psi) cutting heads provide true, perfect alignment to extend the life of focusing tubes and mixing chambers.
Proven to be the Best
Independent tests have shown that the KMT AUTOLINE® design is the ultimate in efficiency and has the lowest operating cost. Tests performed by the University of Missouri-Science & Technology showed that the AUTOLINE® design achieved the best overall cutting performance for speed and efficiency
Everyone claims alignment, however, only the precision finish of the orifices in the AUTOLINE® series enable true precision alignment—even at pressures up to 90,000 PSI!
FEATURES SUMMARY
Wear Insert – Larger and relocated for visibility and easy access.
Same Interior Geometries – High performance cutting with very efficient abrasive usage.
Easy Orifice Change – No tools required.
Weep Hole Indicator – Shows when orifice needs to be tightened further, eliminating over-tightening to protect both the orifice and the nozzle tube.
Re-designed Knob – T-Knob designed for easy focusing tube tightening and dis-assembling.
Angled Abrasive Inlet – Inlet is mounted an angle which allows for a faster abrasive flow.
Easier Hose Attachment – Abrasive feed hose slips over inlet for easier visual attachment.
*Parts sold separately and in assembly kits
PRECISION
For waterjet cutting stainless steel, aluminum, titanium, or cutting composites, the KMT Waterjet Autoline cutting head ensures precision accuracy in every cut. Its advanced technology guarantees meticulous results with high consistency.
MULTI-HEAD CUTTING
The KMT Waterjet Autoline cutting head is optimized for CNC waterjet machines equipped with multiple cutting head assemblies. The perfect inset for the diamond jewel is perfectly aligned for efficient operation and synchronized cutting across all heads for enhanced productivity.
CUT THICK MATERIALS
For waterjet cutting thick titanium, aluminum or cutting mild steel, the KMT Waterjet Autoline is the preferred choice for a waterjet nozzle assembly, capable to change out the KMT diamond jewel in minutes when cutting thin materials including plastics, waterjet cutting composites and more.
KMT Waterjet Related Products
KMT Waterjet Systems | The Power to do More
This KMT Waterjet video demonstrates how to cut aluminum faster at waterjet pressure 90,000psi vs. 60,000psi.
By increasing the waterjet pump pressure from 60,000psi to 90,000psi, the velocity of the water jet stream also significantly increases. The net result is, the higher the pressure, the faster the parts will cut. And by accelerating the water jet stream from 60,000psi to 90,000psi, there is also a reduction in the usage of abrasive costs.
This video shows a side-by-side comparison as to how much faster parts are cut, and how much less abrasive is used by cutting at 90,000psi vs. 60,000psi
KMT Service Engineers are regionally located to assist in cutting head installation to keep your system cutting with precision---PM Programs are available!
Welcome to KMT Waterjet. To continue, please select a language from the options below.
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
