CUTTING SOLUTIONS
PRODUCTS
COMPLETE SYSTEMS

KMT waterjet OEM partner machines are powered by KMT pumps ranging from 90,000 psi to 55,000 psi, with installations available in over 100 countries.

PRO 90,000 psi Pumps – World’s Fastest Waterjet

The KMT Streamline PRO® 90,000 psi Waterjet Pumps will significantly increase production by cutting in less time and use up to 50% less abrasive to produce the Lowest Cost Per Part! The PRO pump is available in three horse-powers for a wide range of cutting applications: 125, 60 and 50 HP

ADS Abrasive Hoppers

KMT Waterjet Systems ADS Series Abrasive Hoppers for Waterjet Machines are easily re-filled during the cutting process—no need to stop cutting! These hoppers are available in 2 sizes: 500 & 2,000 lb.

STREAMLINE® SL-VI 60,000 psi Pumps

KMT Waterjet SL-VI Pumps have decades of proven performance and are considered the Industry Workhorse! The SL-VI Series of pumps are available in: 15, 30, 50, 100 and 200 HP

500V Abrasive Hopper

Our 500 V Hopper precisely monitors the availability of sufficient abrasive closely during the entire cutting process and pneumatically transfers it to the onboard metering device.

KMT CLASSIC 60,000 psi Pump

The New STREAMLINE® CLASSIC Series employs long-stroke technology designed for ease of use, reliability and maximum uptime…Classic KMT with modern technology!

FEEDLINE V Abrasive Feeder

Optimized abrasive consumption for customized applications. Controlled through a central CNC controller or a potentiometer, the FEEDLINE V supplies the cutting nozzle with the optimized flow of abrasive, saving material and costs.

ARA™ 55,000 PSI PUMP

The Ara™ high-pressure pump meets all essential requirements for successful and seamless operation of a waterjet cutting system. The highly reliable intensifier design is one of the key features of the Ara™ pump and is one of the most successful and reliable KMT intensifier designs, called “HSEC”.

FEEDLINE PRECISION Abrasive Meter

The Feedline Precision Abrasive Metering System is an economical and reliable option for accurate delivery of abrasive to the cutting nozzle.

TRILINE® 55,000 psi Direct Drive Pump

The TRILINE^® pump has an excellent cost of ownership value and can be used as a stand-alone unit for everyday cutting needs.

ATS Abrasive Removal Systems

Never shut down production for tank clean outs again. The all new ATS 2200 or 4400 is the perfect way to improve your waterjet operations.

IDE® Diamond Cutting Heads

The KMT Waterjet IDE^® (Integrated Diamond Eductor) One-piece Assembly Cutting Head is rated for pressures up to 60,000 psi and 90,000 psi and is a waterjet nozzle breakthrough in simplicity & peak performance.

AUTOLINE® Cutting Heads

The self-aligning components of the KMT AUTOLINE^® 60,000 psi and PRO 90,000 psi cutting heads provide true, perfect alignment to extend the life of focusing tubes and mixing chambers.

AQUALINE® Water-only Cutting Heads

PROVEN PERFORMANCE AT EXTREME PRESSURES! Our AQUALINE® pure water pneumatic valves have gained an industry-wide reputation for being among the quickest and the most reliable pure water cutting heads under extreme working conditions.

KMT CUT Calculator App

Compare 90,000 psi vs. 60,000 psi cutting and see how much faster you get the job done and at a lower cost per part! The KMT Waterjet Cut Calculator 2.0 App incorporates 25 materials, offers a wider range of substrate thicknesses, horsepower, orifice size, and abrasive rates.

NEO 60,000 psi Pump

The KMT Waterjet NEO Pump incorporates over 50 years of experience offering unparalleled waterjet cutting technological achievements.
APPLICATIONS/INDUSTRIES
- APPLICATIONS
  - Metal
  - Stone
  - Food
  - Composites
  - HVAC
  - Glass
  - Paper
  - Plastic
  - Fiberglass
  - Other
- INDUSTRIES
  - Aerospace
  - Agriculture
  - Architecture
  - Automotive
  - Defense
  - Food/HPP
  - Glass
  - Packaging
  - Manufacturing
  - Other
SALES & SERVICE
DOWNLOADS/VIDEOS
ABOUT US

HELP CENTER

Contact form

KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.

KMT Waterjet AUTOLINE® Abrasive Cutting Head

Best Applications for abrasive waterjet cutting
METAL | STONE | GLASS | COMPOSITES

KMT Waterjet AUTOLINE® Cutting Heads

ABRASIVE WATERJET HIGH SPEED, SELF-ALIGNING CUTTING NOZZLE

Focusing tubes last longer and wear evenly in an aligned cutting head.

The Autoline abrasive waterjet self-aligning components of the KMT AUTOLINE^® (60,000 psi) and AUTOLINE PRO (90,000 psi) cutting heads provide true, perfect alignment to extend the life of focusing tubes and mixing chambers.

Proven to be the Best
Independent tests have shown that the KMT AUTOLINE® design is the ultimate in efficiency and has the lowest operating cost. Tests performed by the University of Missouri-Science & Technology showed that the AUTOLINE® design achieved the best overall cutting performance for speed and efficiency

Everyone claims alignment, however, only the precision finish of the orifices in the AUTOLINE® series enable true precision alignment—even at pressures up to 90,000 PSI!

FEATURES SUMMARY

Wear Insert – Larger and relocated for visibility and easy access.

Same Interior Geometries – High performance cutting with very efficient abrasive usage.

Easy Orifice Change – No tools required.

Weep Hole Indicator – Shows when orifice needs to be tightened further, eliminating over-tightening to protect both the orifice and the nozzle tube.

Re-designed Knob – T-Knob designed for easy focusing tube tightening and dis-assembling.

Angled Abrasive Inlet – Inlet is mounted an angle which allows for a faster abrasive flow.

Easier Hose Attachment – Abrasive feed hose slips over inlet for easier visual attachment.

*Parts sold separately and in assembly kits

PRECISION

For waterjet cutting stainless steel, aluminum, titanium, or cutting composites, the KMT Waterjet Autoline cutting head ensures precision accuracy in every cut. Its advanced technology guarantees meticulous results with high consistency.

MULTI-HEAD CUTTING

The KMT Waterjet Autoline cutting head is optimized for CNC waterjet machines equipped with multiple cutting head assemblies. The perfect inset for the diamond jewel is perfectly aligned for efficient operation and synchronized cutting across all heads for enhanced productivity.

CUT THICK MATERIALS

For waterjet cutting thick titanium, aluminum or cutting mild steel, the KMT Waterjet Autoline is the preferred choice for a waterjet nozzle assembly, capable to change out the KMT diamond jewel in minutes when cutting thin materials including plastics, waterjet cutting composites and more.

KMT Waterjet Related Products

STREAMLINE PRO® 90,000psi | 60hp Waterjet Intensifier Pump

FEEDLINE V Abrasive Metering Feeder System

KMT Genuine Parts and Accessories Order Online 24/7

Abrasive Garnet Hoppers in Multiple Sizes and Specifications

KMT Waterjet Systems | The Power to do More

This KMT Waterjet video demonstrates how to cut aluminum faster at waterjet pressure 90,000psi vs. 60,000psi.

By increasing the waterjet pump pressure from 60,000psi to 90,000psi, the velocity of the water jet stream also significantly increases. The net result is, the higher the pressure, the faster the parts will cut. And by accelerating the water jet stream from 60,000psi to 90,000psi, there is also a reduction in the usage of abrasive costs.

This video shows a side-by-side comparison as to how much faster parts are cut, and how much less abrasive is used by cutting at 90,000psi vs. 60,000psi

KMT Service Engineers are regionally located to assist in cutting head installation to keep your system cutting with precision---PM Programs are available!