- CUTTING SOLUTIONS
- PRODUCTS
- APPLICATIONS/INDUSTRIES
STREAMLINE PRO® 6.200 bar / 60HP Waterjet PUMP
- Waterjet cut thicker materials…faster
- Use 50% less abrasive vs. cutting at 4.100 bar
- Reduce labor and utility costs
- Increase productivity and capacity-cut faster
- LOWER COST PER PART!
ADDITIONAL INFORMATION
KMT Waterjet STREAMLINE PRO® Series
Find out why THE RIGHT KMT PUMP MATTERS!
KMT Waterjet Systems offers 
the broadest range of abrasive waterjet intensifier pumps including the Ultra High Pressure (UHP) KMT STREAMLINE PRO® Series 6.200 bar Waterjet Pump.
Cutting with the PRO 60 HP Pump results in Lower Cost Per Parts by significantly increasing productivity from 50 – 70% over industry standard 4.100 bar 50hp cutting speeds.
SEE THE DATA FOR LOWER COST PER PART AT 6.200 bar/60 HP CUTTING ⇒
Since 2008, the KMT Streamline PRO Series pumps have been commissioned in hundreds of fabrication job shops and metal service centers around the World.
The KMT Rapid Seal Change intensifier pump design technology and is perfect for high volume production from single head to multiple abrasive waterjet cutting head requirements and for intricate detailed cutting with tight tolerance requirements.
FEATURES
- The patented Metal-to-metal seal design is more durable with no wear in the high-pressure cylinder bore
- Tie Rod Design with hydraulic loading tensioner guarantees a longer lifetime of SUPRAlife seals
- Stainless steel liner adds extra protection to ceramic plunger for longer life
- Intensifier topworks redesign can be retrofitted to PRO-I PRO-II Pumps
PRO INTENSIFIER ADVANCED TECHNOLOGY
Hover over a component on the right to see details.
PRO 60 125 Waterjet PUMP SPECIFICATIONS
Below charts are a brief overview of pump specifications. Please see above PDF on this page for detailed pump specifications.
| Description | 125 |
|---|---|
| Motor Rating | 125hp (93.2kw) |
| Pressure Range (Deadhead) | 90,000psi (6.200 bar) |
| Max. Flow Rate at Max. Pressure (60 hz) | 1.59 gal/min (6.0 lpm) |
| Length | 88" (2,230 mm) |
| Width | 59.09" (1,500 mm) |
| Height | 61.12" (1,552 mm) |
| Description | PRO 60 (Metric) |
|---|---|
| Motor Rating | 60hp (45 kw) |
| Pressure Range (Deadhead) | 90,000psi (6.200 bar) |
| Max. Flow Rate at Max. Pressure (60 hz) | 0.78 gal/min (2.9 lpm) |
| Length | 83.7" (2,126 mm) |
| Width | 53.7" (1,364 mm) |
| Height | 59.3" (1,506 mm) |
This chart shows the maximum number of cutting heads per orifice size.
The orifice size is based on the material to be cut, pressure, thickness, abrasive type and the desired finished cut edge. (course, medium, fine)
| MAXIMUM PRESSURE | 90,000 PSI / 6.200 BAR | |
|---|---|---|
| MODEL | PRO 125 | PRO 60 |
| MAXIMUM ORIFICE SIZE | 0.015" | 0.010" |
| Max. quantity 0.004" | 15 | 7 |
| Max. quantity 0.007" | 5 | 2 |
| Max. quantity 0.010" | 2 | 1 |
| Max. quantity 0.012" | 1 |
THE KMT Waterjet pump cutting-PRO 60 DIFFERENCE
PRO 6.200 bar PUMP COMPARISON
This graphic shows that at the same time it takes to waterjet cut 10 parts at 4.100 bar/50hp, the KMT PRO 6.200 bar/60hp pump has cut 15 parts – 50% increase!
Also, the KMT PRO 6.200 bar/125hp pump with two cutting heads has cut 30 parts – a 200% increase!
CUT THICK MATERIALS---UP TO 305 mm
The PRO 60hp pump, with its high pressure and power, efficiently cuts up to 305 mm thick metal.
This benefits customers seeking a near-net finish by reducing processing time minimizing material waste, ensuring faster job completion cost savings. PRO Pumps = Lowest Price Per Part!
INCREASED PRODUCTIVITY
The KMT PRO 6.200 bar/60hp pump cutting with multiple cutting heads increases capacity accelerates production. (See MAX CUTTING HEADS chart above).
Reduce labor costs, shorter production runs, improves profitability = KMT Waterjet PRO®.
KMT Waterjet Pump-PRO 60 COMPLETE CUTTING SYSTEMS
The KMT Waterjet global OEM network offers the largest variety of entry level, standard waterjet tables, large format machines, 5 axis motion control, and robotic integration in the waterjet industry including testing, designing, and manufacturing solutions.
KMT PRO PUMP COMMON REPLACEMENT PARTS
Log-in required to purchase
KMT Waterjet Systems-The Power to do More
This KMT Waterjet video demonstrates how to cut aluminum faster with waterjet pressure at 6.200 bar vs. 4.100 bar.
By increasing the waterjet pump pressure from 4.100 bar to 6.200 bar, the velocity of the water jet stream also significantly increases.
The net result is, the higher the pressure, the faster the parts will cut. And by accelerating the water jet stream from 4.100 bar to 6.200 bar, there is also a reduction in the usage of abrasive costs.
This video shows a side-by-side comparison as to how much faster parts are cut, and how much less abrasive is used by cutting at 6.200 bar vs. 4.100 bar
Welcome to KMT Waterjet. To continue, please select a language from the options below.
HELP CENTER
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
