We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, for other purposes. You can consent to the use of such technologies by using the “Accept” button, by closing this notice, by scrolling this page, by interacting with any link or button outside of this notice or by continuing to browse otherwise.
- CUTTING SOLUTIONS
- PRODUCTS
- APPLICATIONS/INDUSTRIES
STREAMLINE PRO® 6.200 bar/93 kW PUMP
WORLD’S FASTEST WATERJET
ADDITIONAL INFORMATION
KMT Waterjet STREAMLINE PRO® 125
Find out why THE RIGHT KMT PUMP MATTERS!
For waterjet cutting systems, 
introducing the KMT Waterjet PRO 125 Series pump (6.200 bar/125hp/93 kW), recognized as the “World’s Fastest Waterjet,” designed for high-production manufacturing centers.
The PRO 125 HP Pump delivers the abrasive waterjet cutting tables twice the power, by cutting products in up to half the time over conventional 4.100 bar/100 hp/74 kW water jet machining systems.
It’s standout features are:
Improve Performance: Boost capacity by 50%-100% compared to cutting at 4.100 bar/50hp/37 kW.
Increase Capacity: Faster cutting allows for more parts to be produced in less time.
Lowest Cost Per Part: Complete projects faster, reduce labor hours
Abrasive Savings: Faster cutting, reduce abrasive usage up to 50%
Cleaning finished part: Smooth cut, minimal secondary finishing, near-net finish
Two Cutting Heads: Waterjet with two cutting nozzles at 6.200 bar for high volume thinner materials. 
Warranty: Comes with a standard two-year warranty.
HARD Materials No Heat Affected Zone Cut Conductive and Nonconductive
THICK Materials Cut 356 mm Aluminum, 305 mm Cast Steel Near Net Cutting
LAYERED Materials Save Time Money Cutting Layered Parts
KMT PRO-ADVANTAGE Designed for maximum productivity, profitability, and extended performance. Combines the lowest cost of operating a waterjet pump with outstanding KMT Genuine Service support to provide optimum value.
The KMT Rapid Seal Change intensifier pump design technology is perfect for high-volume waterjet cutting production from single head to multiple abrasive waterjet cutting head requirements and for intricate detailed cutting with tight tolerance requirements.
COMPARE PUMPS FOR LOWEST PRICE PER PART
WATERJET CUTTING 1″/2.5 CM THICK ALUMINUM PART (94.5″/240 CM CUT LENGTH)
AT 90,000 PSI/6.200 BAR 125 hp = LOWEST COST PER PART
The chart below illustrates how abrasive usage and cutting time results* in the lowest cost per part when cutting at 90,000 PSI/6.200 bar versus 60,000 PSI/ 4.100 bar.
*Results from KMT Waterjet Cut Calculator App and include current operating costs, labor and utilities.
| PUMP MODEL/HP/PSI/bar | CUT TIME (Minutes) | ABRASIVE USED (Pounds/kg) | COST PER PART* |
|---|---|---|---|
PRO 125 |
4.68 |
10.11/4.60 |
⇒$9.52 |
|
PRO 60/90,000psi/6.200 bar |
9.37 |
10.11/4.60 |
$13.48 |
|
PRO 50/90,000psi/6.200 bar |
10.55 |
9.28/4.20 |
$14.25 |
|
SL-VI 100/60,000psi/4.100 bar |
7.34 |
18.05/8.19 |
$13.47 |
|
SL-VI CLASSIC 50/60,000psi/4.100 bar |
13.25 |
18.95/8.60 |
$19.00 |
|
NEO 50/60,000psi/4.100 bar |
13.25 |
18.95/8.60 |
$18.60 |
|
TRILINE 30/55,000psi/3.800 bar |
18.31 |
18.50/8.40 |
$23.73 |
PRO INTENSIFIER ADVANCED TECHNOLOGY
Hover over a component on the right to see details.
PRO 60 125 PUMP SPECIFICATIONS
Below charts are a brief overview of pump specifications. Please see above PDF on this page for detailed pump specifications.
| Description | 125 |
|---|---|
| Motor Rating | 125hp (93.2kw) |
| Pressure Range (Deadhead) | 90,000psi (6.200 bar) |
| Max. Flow Rate at Max. Pressure (60 hz) | 1.59 gal/min (6.0 lpm) |
| Length | 88" (2,230 mm) |
| Width | 59.09" (1,500 mm) |
| Height | 61.12" (1,552 mm) |
| Description | PRO 60 (Metric) |
|---|---|
| Motor Rating | 60hp (45 kw) |
| Pressure Range (Deadhead) | 90,000psi (6.200 bar) |
| Max. Flow Rate at Max. Pressure (60 hz) | 0.78 gal/min (2.9 lpm) |
| Length | 83.7" (2,126 mm) |
| Width | 53.7" (1,364 mm) |
| Height | 59.3" (1,506 mm) |
This chart shows the maximum number of cutting heads per orifice size.
The orifice size is based on the material to be cut, pressure, thickness, abrasive type and the desired finished cut edge. (course, medium, fine)
| MAXIMUM PRESSURE | 90,000 PSI / 6.200 BAR | |
|---|---|---|
| MODEL | PRO 125 | PRO 60 |
| MAXIMUM ORIFICE SIZE | 0.015" | 0.010" |
| Max. quantity 0.004" | 15 | 7 |
| Max. quantity 0.007" | 5 | 2 |
| Max. quantity 0.010" | 2 | 1 |
| Max. quantity 0.012" | 1 |
PRO 125 COMPLETE CUTTING SYSTEMS
The KMT Waterjet global OEM network offers the largest variety of entry level, standard waterjet tables, large format machines, 5 axis motion control, and robotic integration in the waterjet industry including testing, designing, and manufacturing solutions.
THE KMT Waterjet cutting PRO 125 DIFFERENCE
PRO 6.200 bar PUMP COMPARISON
This graphic shows that at the same time it takes to waterjet cut 10 parts at 4.100 bar/50hp, the KMT PRO 6.200 bar/60hp pump has cut 15 parts – 50% increase!
Also, the KMT PRO 6.200 bar/125hp pump with two cutting heads has cut 30 parts – a 200% increase!
CUT THICK MATERIALS---UP TO 305 mm
The PRO 125hp pump, with its high pressure and power, efficiently cuts up to 305 mm thick metal.
This benefits customers seeking a near-net finish by reducing processing time minimizing material waste, ensuring faster job completion cost savings. PRO Pumps = Lowest Price Per Part!
INCREASED PRODUCTIVITY
The KMT PRO 6.200 bar/125hp pump cutting with multiple cutting heads increases capacity accelerates production. (See MAX CUTTING HEADS chart above).
Reduce labor costs, shorter production runs, improves profitability = KMT Waterjet PRO®.
KMT Waterjet Systems-The Power to do More
This KMT Waterjet video demonstrates how to cut aluminum faster with waterjet pressure at 6.200 bar vs. 4.100 bar.
By increasing the waterjet pump pressure from 4.100 bar to 6.200 bar, the velocity of the water jet stream also significantly increases.
The net result is, the higher the pressure, the faster the parts will cut. And by accelerating the water jet stream from 4.100 bar to 6.200 bar, there is also a reduction in the usage of abrasive costs.
This video shows a side-by-side comparison as to how much faster parts are cut, and how much less abrasive is used by cutting at 6.200 bar vs. 4.100 bar
KMT PRO PUMP COMMON REPLACEMENT PARTS
Log-in required to purchase
KMT Service Engineers are regionally located to assist in the installation of all KMT products to keep your system cutting with precision---PM Programs are available!
Welcome to KMT Waterjet. To continue, please select a language from the options below.
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
