500V Abrasive Hopper storage system

• Abrasive Flow Monitoring Saves Time and Costs
  Our 500 V HOPPER precisely monitors the availability of sufficient abrasive closely during the entire cutting process and pneumatically transfers it to the onboard metering device. This protects your valuable material from damage and saves unnecessary costs and time. Its concept assures process stability, security and a very high degree of reliability.
• Abrasive Low Level Sensor
  The 500 V HOPPER provides all features to stabilize the cutting process when connected to a centralized control system. The abrasive delivery system features a normally closed proximity switch sensor which indicates when the abrasive content reaches a low level. This feature provides the capability to integrate the signal into the waterjet system controller and notifies the operator when it’s time to refill the abrasive. When used in one or multiple shift operation of automated cutting systems, the 500 V HOPPER contributes to the economical use of the entire waterjet cutting system.

FEATURES:

• Screened loading area allows for individual bags to be loaded thorough the screen on top of the bulk hopper.
• Storage tank holds up to 600 pounds of abrasive.
• Low abrasive level sensor—prevents running out of abrasive while cutting.
• Air regulator and 2 way valve controls the pressure and on/off capabilities.
  Reliability & Low Maintenance at a LOW COST

The 500 V HOPPER is just one link in the KMT quality abrasive management system for waterjet cutting.

Use with the FEEDLINE V Electronic Metering System to provide a constant metered flow of abrasive and
optimize abrasive consumption.

The patented design of the IDE® Diamond Cutting Nozzle provides a sharper, faster cutting stream which will
further reduce abrasive use and maximize efficiency for lower operating cost.