We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, for other purposes. You can consent to the use of such technologies by using the “Accept” button, by closing this notice, by scrolling this page, by interacting with any link or button outside of this notice or by continuing to browse otherwise.
Menu
- CUTTING SOLUTIONS
- PRODUCTS
- APPLICATIONS/INDUSTRIES
ABRASIVE removal systems
Improve waterjet cutting operational efficiency with the new vacuum extraction of abrasive while continuously waterjet cutting.
ATS 2200 and 4400 | Abrasive Removal Solution for Waterjet Cutting Systems
Never shut down production for tank cleanouts again with the new abrasive removal machine! The KMT Waterjet ATS 2200 or 4400 is the perfect way to improve your waterjet operations. 
- Designed to work with 2,200 of 4,400 lb. super sacks respectively, this abrasive handling solution allows you to quickly and easily remove spent abrasive solids from the waterjet holding tank.
- Engineered with rigid steel construction and equipped with a Sandpiper HDF2 diaphragm pump, the ATS 2200 provides reliability and durability for many years of use.
- The pneumatic diaphragm pump runs on shop air, with no additional power needed.
- The patented 6” Cross-Flow Separator design removes sediment before reaching the pump, reducing maintenance costs and repairs.
- The unique abrasive removal “nozzles” allow for high rates of removal of more than one ton per hour.
- The ATS 2200 offers manual use or hands-free sludge removal with optional in-tank pipe kit and cycle timer (sold separately).
The ATS removal systems 
are 
just one link in the KMT quality abrasive management system for waterjet cutting.
Use with the New KMT 500 V Abrasive storage Hopper—it precisely monitors the availability of sufficient abrasive closely during the entire cutting process and pneumatically transfers it to the onboard metering device. This protects your valuable material from damage and saves unnecessary costs and time. Its concept assures process stability, security and a very high degree of reliability.
FEEDLINE V Electronic Metering System to provide a constant metered flow of abrasive and
optimize abrasive consumption.
The patented design of the IDE® Diamond Cutting Nozzle provides a sharper, faster cutting stream which will
further reduce abrasive use and maximize efficiency for lower operating cost.
Advantages of the ATS GARNET VACUUM MACHINES
- Reduced maintenance costs
The ATS features a patented 6” Cross-Flow Separator design which removes sediment from the water stream before it reaches the pump increasing the removal rate and virtually eliminating maintenance costs and pump repairs.
- RUGGED ENGINEERING DESIGN
Engineered with rigid steel construction and equipped with a Sandpiper HDF2 diaphragm pump, the ATS 2200 provides reliability and durability for many years of use.
- KMT GENUINE SERVICE
KMT Genuine Service is closer than you think and can install your new ATS abrasive remover and fill your abrasive orders for you.
Call +1-800-826-9274, press 2 or email: kmtgenuineservice@kmtwaterjet.com
ABRASIVE REMOVAL FAQ'S
Get the waterjet cutting answers you need!
How does the KMT abrasive removal machine work?
The KMT abrasive removal machine has suction or filtration mechanisms to extract used abrasive material from the waterjet tank, separating it from water for disposal or recycling.
MORE FAQ'S
KMT Service Engineers are regionally located to assist in Your Abrasive Removal installation to keep your system cutting with precision---PM Programs are available!
Welcome to KMT Waterjet. To continue, please select a language from the options below.
Contact form
KMT Waterjet has global offices to assist you in your region. Contact us using the following form, and the message will be forwarded to the local office which can provide the best support.
