CUTTING SOLUTIONS
PRODUCTS
COMPLETE SYSTEMS

KMT waterjet OEM partner machines are powered by KMT pumps ranging from 6.200 bar to 3.800 bar, with installations available in over 100 countries.

PRO 6.200 bar Pumps – World’s Fastest Waterjet

The KMT Streamline PRO® 6.200 bar Waterjet Pumps will significantly increase production by cutting in less time and use up to 50% less abrasive to produce the Lowest Cost Per Part! The PRO pump is available in three horse-powers for a wide range of cutting applications: 125 and 60 PS

ABRALINE IV Abrasive Hopper

Precisely monitors abrasive feed usage during entire cutting process. Designed for large cutting machines which operate continuously and with multiple cutting heads. Capacity – 1.000 kg

STREAMLINE® SL-VI 4.100 bar Pumps

KMT Waterjet SL-VI Pumps have decades of proven performance and are considered the Industry Workhorse! The SL-VI Series of pumps are available in: 15, 30, 50 und 100 PS

ABRALINE V Abrasive Hopper

Precisely monitors abrasive feed usage during entire cutting process. Designed to sufficiently ensure the abrasive feed for average cutting needs. Capacity – 425 kg

KMT CLASSIC V-Drive 3.800 bar Energy Saving Pump

The STREAMLINE® CLASSIC with V-Drive combines the KMT proven intensifier concept with energy saving drive and control technology for energy savings and efficient waterjet cutting. Equipped with a speed-controlled motor drive, the CLASSIC V-Drive satisfies any criteria specifying an energy saving machinery.

FEEDLINE V Abrasive Feeder

Optimized abrasive consumption for customized applications. Controlled through a central CNC controller or a potentiometer, the FEEDLINE V supplies the cutting nozzle with the optimized flow of abrasive, saving material and costs.

ATS Abrasive Removal Systems

Never shut down production for tank clean outs again. The all new ATS 2200 or 4400 is the perfect way to improve your waterjet operations.

IDE® Diamond Cutting Heads

The KMT Waterjet IDE^® (Integrated Diamond Eductor) One-piece Assembly Cutting Head is rated for pressures from 4.100 bar to 6.200 bar and is a waterjet nozzle breakthrough in simplicity & peak performance.

AUTOLINE® Cutting Heads

The self-aligning components of the KMT AUTOLINE^® 4.100 bar and 6.200 bar cutting heads provide true, perfect alignment to extend the life of focusing tubes and mixing chambers.

AQUALINE® Water-only Cutting Heads

PROVEN PERFORMANCE AT EXTREME PRESSURES! Our AQUALINE® pure water pneumatic valves have gained an industry-wide reputation for being among the quickest and the most reliable pure water cutting heads under extreme working conditions.

KMT CUT Calculator App

Compare 6.200 bar vs. 4.100 bar cutting and see how much faster you get the job done and at a lower cost per part! The KMT Waterjet Cut Calculator 2.0 App incorporates 25 materials, offers a wider range of substrate thicknesses, horsepower, orifice size, and abrasive rates.

ARA 3.800 bar Pump

The Ara™ high-pressure pump meets all essential requirements for successful, economical and seamless operation of a waterjet cutting system. The highly reliable “SSEC” intensifier design is one of the key features of the AraTM pump.
APPLICATIONS/INDUSTRIES
- APPLICATIONS
  - Metal
  - Stone
  - Food
  - Composites
  - HVAC
  - Glass
  - Paper
  - Plastic
  - Fiberglass
  - Other
- INDUSTRIES
  - Aerospace
  - Agriculture
  - Architecture
  - Automotive
  - Defense
  - Food/HPP
  - Glass
  - Packaging
  - Manufacturing
  - Other
SALES & SERVICE
DOWNLOADS/VIDEOS
ABOUT US

Packaging INDUSTRY

KMT Waterjet ultrahigh-pressure pumps, cutting nozzles, and technical support are used worldwide for cutting, packaging, and palletizing products.

WATERJET TECHNOLOGY IN THE Packaging INDUSTRY

Water jet cutting technology has been used since 1971 for paper cutting, cardboard, and soft materials.

Photo: SHAPE PROCESS AUTOMATION and application engineers partner with industry leaders to integrate the waterjet cutting line into automated picking and packaging of products.

In fact, this process supersedes the development of the abrasive waterjet used to cut harder materials such as stone, glass, and metals. Unlike abrasive waterjet cutting, however, only pure waterjet is used to cut paper and foods.

The clean, very thin waterjet stream (thinner than a strand of human hair) does not cause the material being cut to absorb water, maintaining the integrity of the paper. The technology also does not create heat-affected zones while precisely cutting with speed. Thus, the efficiency of the process makes cutting with water jets an effective solution for paper and corrugate packaging manufacturers.

Waterjet cutting with pure water is the ideal solution for the cutting and slitting of paper and plastic webs as well as cardboard panels. The technology is already widely used in the production of wallpaper and packaging material.

CUTTING CARDBOARD BOXES SINCE 1971

The first paper cutting water jet system was used for paper manufacturing at Alton Boxboard in Alton, IL. Pure water jets were also used to cut paper-based materials and honeycomb for the aerospace industry.

FAST ROLL CUTTING

Kraft paper rolls can be slit into multiple widths simultaneously using multiple cutting heads, and is much faster than blade cutting as there is no need to stop and sharpen the tools.

VERSATILE–USED IN MOST INDUSTRIES

Waterjet is used in the food packaging industry to hygienically cut food products. KMT Waterjet cutting pumps and cutting heads are a USDA Certified Equipment process.

CUSTOM WATERJET AUTOMATION SYSTEMS

The 6-Axis robotic waterjet cutting cell is designed and configured to meet your specific manufacturing needs – from a single robot to multiple robot cells, complete with product fixturing, material handling and packing.

PACKAGING Industry Waterjet Systems, powered by KMT pumps and cutting heads

WATERJET CUT CARDBOARD PADS-CUT SPEEDS

Powered by KMT Waterjet Pumps

Corrugate cardboard pads are cut with a KMT Waterjet 3.800 bar pump at multiple speeds.