Print This Page Email This Page Request More Information

KMT Autoline™ II Waterjet Abrasive Cutting Nozzle

For nearly four decades, KMT has been refining the water jet cutting process, developing the very best technology to meet modern manufacturers’ demands for versatility, speed, and efficiency from their water jet cutting systems. Whether the application calls for water-only or an abrasive waterjet, KMT Waterjet offers cutting nozzles that deliver high-pressure water at speeds that slice through diverse materials with ease. With KMT self-aligning AUTOLINE nozzles, stone cutting is just as precise as paper cutting or food cutting. Just as important as cutting marble and other hard materials, however, is the ability of the nozzle to undergo maintenance and replacement, as necessary, without stalling operations. A unique feature of the KMT Waterjet design is that individual components can be swapped out without requiring the entire nozzle to be replaced (more detail about this design is included below). As a result, water cutting operating costs are kept to a minimum and production is kept to a maximum. This offers manufacturers a competitive advantage in their cutting processes.

In addition to AUTOLINE nozzles, KMT Waterjet also manufactures efficiently designed water jet pump parts, filters, tubing, adapters, fittings, and more. When your margin for error is zero, rely on KMT Waterjet.

KMT AUTOLINE II™ Abrasive Waterjet Cutting Nozzle is Proven to be Best!

Independent tests have shown that the KMT Waterjet Systems AUTOLINE™ design is the ultimate in water jet cutting efficiency and has the lowest operating cost. The KMT Water Jet cutting nozzles can cut steel, cut marble, cut stone, tile, glass, composites, and food.

Tests performed by the University of Missouri-Science & Technology, showed that the KMT Waterjet AUTOLINE™ design achieved the best overall waterjet cutting performance for speed and efficiency when cutting metal, cutting stone, marble and tile and for cutting composites, paper, aluminum and much more.

KMT Waterjet further improves the cutting power of the AUTOLINE™ with the KMT AUTOLINE™ II.

The new KMT Waterjet cutting AUTOLINE II™ abrasive waterjetcutting nozzle has an easier fitting for the abrasive hose, an abrasive inlet mounted at an angle for improved flow, and a larger wear insert that is much easier to replace. The modular design of the KMT AUTOLINE II™ provides the ultimate in waterjet efficiency for everything from stone cuttingto food and paper cutting.

Like the original KMT AUTOLINE™, all wear components can be changed individually, as needed, allowing maximum efficiency. In all abrasive cutting nozzles, there are three areas of wear: the orifice, the mixing chamber, and the focusing tube. The KMT AUTOLINE™ enables the individual replacement of any wear component, maximizing efficiency to achieve the lowest operating cost.

The net result is an outstanding nozzle that delivers a sharper, more coherent cutting stream for faster cutting while using less abrasive. KMT Waterjet AUTOLINE II™ is the best, most precise option for cutting marble, glass, composite parts, and a variety of other materials.

The Next Generation of the AUTOLINE™ Series, the AUTOLINE™ PRO, is designed to provide the ultimate in Waterjet Cutting efficiency at 90,000 PSI/6.200 bar!

 The new KMT Waterjet AUTOLINE™ PRO has the same modular design and components found in the KMT AUTOLINE™ II but is designed to perform with the Streamline™ PRO 90,000 PSI /6.200 bar Pump at the highest water jet pressure for increased waterjet cutting speeds and increased productivity!

KMT Waterjet Systems are used in a wide variety of industries including automotive, military, aerospace, tile, stone, food, textiles, rubber, foam, glass and much more. Call 800-826-9274, Contact Us or e-mail sales@kmtwaterjet.com for information on how water jet cutting can improve your cutting application. 

The self-aligning components of the KMT AUTOLINE™ PRO provide true, perfect alignment to extend the life of focusing tubes and mixing chambers. Everyone claims alignment; however, only the precision finish of the orifices in the KMT Waterjet AUTOLINE™ series enable true precision alignment—even at pressures up to 90,000 PSI for effective water cutting!Focusing tubes last longer and wear evenly in an aligned cutting nozzle.

 For a waterjet cutting system, ultra high-pressure water jet pump, or any component for a water jet system, trust KMT Waterjet, the leading global manufacturer of waterjet cutting systems. KMT Waterjet Systems’ product offerings include: UHP Pumps, Waterjet cutting nozzles, Focusing Tubes, Pneumatic Cutting Valves, Intensifier and High pressure parts, Abrasive Cutting Systems, Waterjet Spare Parts, High pressure Valves, Fittings and Tubing Products, Diamond Orifices, Sapphire Orifices, Ruby Orifices, and Robotic applications.